What should I do if the motorcycle Clutch Cable suddenly breaks?
1. Forcibly slow down and downshift
If the clutch line is broken suddenly, you can downshift the car by forced downshifting or releasing the accelerator. After the car is down, the brake can be used to stop the car.
2. Don't turn off the ignition switch directly
This kind of operation is the most dangerous. Although the clutch cannot be operated at this time, the engine is still working in the gear position. If the engine is directly turned off, the resistance will be large, and finally the rear wheel will lock up, or the motorcycle will lose control directly. , The driver's risk index will be higher.
3. Continue driving
If the car owner and the motorcycle driving on the road are relatively remote, in addition to using the method of forcibly slowing down and downshifting the car to stop and wait for rescue, but in this case, the rescue will not be possible in a short while, so in the case of no clutch Next, the motorcycle can start again, but it needs some physical strength.
If you need to lower the car when in neutral gear, it is better if there is a small slope nearby. With the help of the downward trend, put the gear to the first gear and then give the accelerator. At this time, the motorcycle is not easy to stall. Wait until the time is almost the same. Then adjust the gear to 2nd gear, and you can drive normally again.






